Bellus Biokey Fingerprint Reader (without flash memory)

Biokey Reader Features:

 PC Login.

 PC Lock.

 File Encryption

 File Decryption

 Password bank 

Fingerprint  Reader Specification
 
              1      General Description

The USB Fingerprint reader provides users the convenience to gain access to confidential files with the swipe of a finger, rather than typing passwords for many applications.

2     Basic Characteristics 

2.1      Electronics :

2.1.1     CMOS Sensor type : Monochrome CIS sensor 616/308 pixel.

2.1.2     Operation voltage : 3.3V power supply.

2.1.3     Gray level : 256 grayscale.

2.1.4     Support power management.

2.1.5     Light source illumination control.

2.1.6     Build-in :

2.1.6.1   SRAM : 4 KByte, as data buffer.

2.1.6.2   Built-in hi-speed 8 bits ADC / 4Mhz.

2.1.6.3   Timing Generate ASIC.

2.1.7     Image capture speed :

2.1.7.1   1200 dpi 12cm/sec.

2.1.7.2   600 dpi 38cm/sec.

2.1.8     Support output interface :

2.1.8.1   8 bits parallel memory interface.

2.1.9     I/O functions :

2.1.9.1   Power consumption when operation : under 180mA.

2.1.9.2   Suspend mode power consumption : under 4mA.

2.1.10   IEC 6100-4-2 Level 4 ESD Capability (+/- 15KV).

2.1.11   Operation temperature : -20℃ ~ 60℃.

2.1.12   Storage temperature: -40℃ ~ 85℃.

2.1.13   Complies with :

2.1.13.1  Universal Serial Bus Specification revision 1.1 / 2.0

2.1.13.2  SLC/MLC NAND flashes

2.1.14   Supports 1-bit/4-bit hardware-base ECC circuitry for NAND flashes

2.1.15   Supports 8-bit/16-bit high-speed access interface for NAND flashes

2.1.16   Supports 512/1K/2K bytes per page for NAND flashes

2.1.17   Supports data transfer rates up to 480 Mbit/s and 12 Mbit/s with on-chip USB 2.0

                   transceiver
 

2.2       Optical :

Illuminator : Red-led  * 4 pcs

Wavelength: 631 nm

Resolution: 600/1200 DPI

Sensing area optical width: 10 mm

Operation method: contact and sweep on optical window
 

2.3       Mechanical : (FID + socket)

2.3.1     Dimension : 85.0 * 24.0 * 8.0 mm. 

2.3.2     Weight : around 20g.

2.4      Pen Drive support :

2.4.1     For PC/NB: Win2K and WinXP.

2.5      Software developing support : (for OEM or ODM customers only)

To develop customer’s software based on functions of  the dynamic link library, the followings are supported also :

2.5.1     Software reference flowchart

2.5.2     Software API description

2.6      Power :

2.6.1     Power supply :

2.6.1.1   Operation voltage : 3.3V power supply.

2.6.2     Power consumption : Max 180mA
 

3    Environmental Conditions : 

3.1      Operating Temperature          :  -20 ~ 60 Centigrade Degree

3.2      Operating Humidity              :  35% ~ 80% RH, Non-Condensing

                                         ( No dew, and temperature condition 40℃ )

3.3      Storage Temperature             :  -40~ 85 Centigrade Degrees

3.4      Storage Humidity                     : 20% ~ 80% RH, Non-Condensing

                                         ( No dew, and temperature condition 40℃ )

3.5      Life test                                   : 1M sweep times
 

4    System Requirements  

4.1      PC/NB :

4.2.1     CPU                        :  Pentium-III or above.

4.2.2     Operating System   :  Win2000, WinXP.

4.2.3     Memory                   :  128 MB or above.

5   Fingerprint Reader application include following functions:  

5.1. PC Login.

5.2. PC Lock.

5.3. File Encryption

5.4. File Decryption

5.5. Password bank 

  The above functions need fingerprint identification.
 

7    Warranty  :  12 months after shipment date